Sigmund Edge

SigmundEdge, is a tolerance analysis software which allows designers, engineers to work and try, optimize and validate assembly build quality, relative to piece part tolerance and assembly process variation. SigmundEdge is completely integrated within Solid Edge and Certified Select Product, this software can be used early phase of development before design solidification and hard tooling procurement. SigmundEdge preventions are costly tweaking delays at ramp-up as well as long-term variation problems,Certified PLM Solution Partner status within Siemens.

BENEFITS:

SigmundEdge can find the quality of a Solid Edge assembly which is based upon predetermined tolerance values or determine the component tolerances required to meet a given assembly build objective. SigmundEdge includes a powerful utility,automatically optimizes all the tolerances in a model. Sigmund Edge's powerful utilities and ease to work menu-driven modeling capabilities greatly reduce modeling time and effort, and its reporting module provides all relevant information in four easy-to-interpret reports. SigmundEdge improves the design and assembly process, adds precision where needed and eliminates more costly and conservative designs.

Solid Edge Integration:

  • Ease of use & Quick to learn specially deisgned for non-specialist.
  • Automated Worst case Interference analysis.
  • Intelligent Nominal and tolerance based Interference Visualization at worst case, Min, Max conditions.
  • Associated to Solid Edge Geometry & Tolerances, considers both GD&T, Linear Tolerances.
  • Works with SolidEdge Part, Assembly and Draft modes.

Benefits

  • Worst case, RSS, MRSS, PCRSS, and Monte carlo Simualtions includes five analysis.
  • Design for Six Sigma-Roll-Down & Roll Up Methodologies for performing tolerance analysis.
  • Range of statistical distributions and Extensive automatic report generation.
  • Design is optimized with unique tolerance optimization and cost minimization capabilities .
  • Identify Cost saving Opportunities with Cost Savings Report.
  • Sensitivity, Tolerance Impact, Automatic Statistical, What-if and SPC report generation.

SIGMUND ABA for SOLID EDGE

Sigmund ABA for Solid Edge is an analysis tool for assemblies, for parts and assemblies defined in Solid Edge, Engineers to try the 3-D effects of component tolerances on the quality of manufactured products with full fledge.Sigmund provides engineers a easy to use Solid Edge-Sigmund interface to etry the potential capability of their Solid Edge designs drawings, to ensure that the assemblies go together 100 percent of the time, to meet all the assembly performance criteria. Sigmund ABA is fully integrated with Solid Edge.

Benefits

Sigmund ABA for SolidWorks is used to resolve complex assembly problems for rigid bodies, tries design improvements, identify important design characteristics, and determine optimal tolerances for parts and assemblies created in SolidWorks. Using Sigmund ABA for SolidWorks from design concept through production will improve quality, reduce costs, and cut development life cycle times.

Development of a Sigmund assembly build analysis model follows an intuitive, step-by-step methodology that includes Component Geometry Creation, GD&T or Tolerance Emulation & Optimization

SigmundABA Kinematics

Sigmund ABA Kinematics is the World's only assembly build analysis tool that allows engineers to try the 3-D variational effects of kinematic mechanisms and component tolerances on the quality of products manufactured throughout the range of motion. Sigmund ABA Kinematics provides engineers with an ease to use interface to evaluate the capability of their kinematic mechanisms and the component/assembly design, ensuring that assemblies go together 100% of the time, while meeting all the assembly performance criteria.Sigmund ABA Kinematics is available as standalone, as well as integrated with Solidworks, SolidEdge, ProEngineer | Creo.

SigmundABA Kinematics Features:

  • Consider piece part/assembly variation and kinematic motion in the same environment.
  • Allows defining relative motion between multiple parts/components by using different kinematic joints, such as - primitive, revolved, cylindrical, universal, planar, ball, and bearing joints.
  • Allows assigning different driver motion in a mechanism.
  • Allows considering variation analysis in both open and closed loop mechanisms with zero to multiple degrees of freedom.
  • Can animate kinematic motion and trace the range of motion for a specific feature at both nominal and deviated conditions.
  • Can evaluate thousands of outputs throughout the range of motion in mechanisms.

Benefits:

  • Sigmund ABA Kinematics can be used to resolve complex assembly problems for kinematic mechanisms, evaluate design improvements, identify important design characteristics, and determine optimal tolerances for parts and assemblies with kinematic joints.
  • Avoid creating multiple models by considering variation and kinematic motion at the same time.
  • Allows accurate assembly of closed-loop kinematics mechanisms.
  • Can identify non-build conditions because of actual and accurate constraints applied at specific joints.
  • Can evaluate the effects of variation throughout the range of motion in mechanisms.
  • Can compare them with the nominal range of motion relative to what you might see in an ADAMS model.
  • Can generate automated reports showing multiple indices of information throughout the range of motion.