Home
|
|
|
|
|
|
|
 |
G D & T using SolidWorks
DimXpert empowers
users to develop correct and complete drawings for their designs while
ensuring complaince to ASME Y14.5. Never has been an approach so
easy and complete for ensuring fool-proof drawings. DimXpert goes
a long way in ensuring downstream errors attributed to drawings are a
thing of the past.
|
|
|
 |
|
|
Continued from previous
page...
Pattern of 8 holes
having counter-bore are easily defined using the automatic DimXpert
dimensioning scheme. Definition of width-type features with Plus/
Minus Tolerancing scheme completes the GD and T scheme for the
Hydraulic cylinder flange.
Completeness of the GD and T Scheme is assured since all the features
are displayed Green while highlighting the Tolerance Status under
DimXpert.
Hydraulic
Cylinder Flange Views showing Completeness in Dimensioning
Once Part
dimensioning using DimXpert has been completed, SolidWorks Drawing can
be rapidly created with the dimensions and feature control frames, well
laid out, by enabling DimXpert Annotations when inserting views.
Completed drawing is shown below for reference.
Completed Drawing using DimXpert Annotations
3D Annotations
using DimXpert
| DimXpert is also
available in Drawings facilitating an easy creation of drawings in an
accurate manner. It should be emphasized that preparing a drawing
requires clarity of thought, sincerity of purpose and completness of
task at hand without compromising on accuracy. Needless to say,
before embarking on development of a drawing to define product
specification, creation of a drawing requires planning and
preparation. DimXpert goes a long way in assisting designers in
preparing error-proof drawings. |
|
|
|
